Aperçu
The SB Series is a 6" polarized base with annunciator output featuring a current limiting resistor, and a blocking diode to enhance annunciator function. The SB Series Smoke Detector base is designed specifically for use with the Potter Smoke Detector Models IS-24, PS-24 and PS-24H.
These detectors will not sense fires which start where smoke does not reach the detector.
Fires on other building levels, within walls, on roofs , in chimneys, or on the other side of closed doors may not be detected.
Fires from explosions, improperly stored flammable liquids, escaping gas, arson or fires resulting from inadequate fire protection practices may not be detected.
Smoke detectors should be tested upon completion of installation and at least semi-annually thereafter, in accordance with the section of "Inspections, Tests, and Maintenance" in NFPA-72.
To Install the Detector: Insert the detector into the base, turn the detector clockwise until it locks, then tighten the vandal resistant allen screw
Renseignements généraux
Nom : Potter SB-46 SB Series 46mA Draw at 24VDC Smoke Detector Base , Potter Electric
Catégorie : Detector Parts & Accessories
UPC Code : 785192010159
Country of Origin : United States. Country of origin is subject to change.
Spécifications
Caractéristiques générales
ADI Numéro du produit : PL-SB46
Code fabricant : SB46
Fabricant : Potter Electric Signal, LLC
Marque : Potter
Nom de produit : SB Series Smoke Detector Base
Série de produit : SB
Type de produit : Smoke Detector Base
Caractéristiques techniques
Compatible avec : Smoke Detector
Caractéristiques de l'alimentation
Courant d'entrée : -0.046000 A
Courant d'entrée (A) : -0.046
Tension d'entrée : 24 V DC
Tension d'entrée (V DC) : 24
Caractéristiques physiques
Couleur du produit : White
Divers
Certifications et normes : <ul> <li>UL</li> <li>ULC</li> </ul>
Compabilité : <p>Potter IS-24, PS-24 and PS-24H</p>
Pays d'origine : United States
