Please upgrade to the new Edge browser, or use Chrome, Firefox or Safari, before continuing. Internet Explorer will not support the best shopping experience on the ADI Digital Branch site after March 12. close button
Nouveaux revendeurs : 20 $ de réduction sur les panneaux de sécurité 2GIG Présentoirs commerciaux du magasin LG et plus encore      Jusqu'à 40 secondes d'accélération des alarmes      Découvrez notre guide actualisé sur la maison intelligenteShop Fire-Lite FACPs avec communicateur 5G LTE-M intégré
Produits
{{vm.adilogoaltText}} {{vm.adilogoaltText}}
search

Mier BW-24PM6 Pole Mount Kit For 24" Wide Metal Box On A 6" Pole

Marques: Mier Products
ADI #:BW-24PM6 No De Modèle #: BW-24PM6  Nom: Mier BW-24PM6 Pole Mount Kit For 24" Wide Metal Box On A 6" Pole
Image of BW-24PM6

Aperçu

Mier Recommends using at least two people to pole-mount heavy enclosures, and performing steps 1-4 PRIOR to going to job site.

  • Mark the center point of each Mounting Rails (A).
  • Slide the Adjustable Band Guides inside both Mounting Rails, and center them to the point marked on step 1 (B).
  • Place the 1/4" x 20 Screws and 1/4" Washers on the outside of the Mounting Rails, run the bolts through the Mounting Rails and Adjustable Band Guides, and secure with the 1/4" x 20 locknuts on the inside (C and B).
  • Insert the two (2) Heavy-Duty Adjustable Bands into the two (2) Adjustable Band Guides inside the Mounting Rails. The bands should curve outwards, away from the inside of the Mounting Rails. One (1) of these Heavy-Duty Adjustable Bands goes in each of the Adjustable Band Guides assembled inside each of the Mounting Rails (D).
  • Attach the two (2) assembled Pole-Mount Rails onto the two (2) Mounting Lips of the Enclosure using the four 3/8" x 16 Carriage Bolts entering through the inside of the Mounting Rail, use TWO (2) of the eight 3/8" EXTRA THICK Washers ON EACH bolt between the rail and the enclosure lip for proper spacing, then use the 3/8" Standard Washers on the outside of the Enclosure Lip with the 3/8" flange-nuts (E).
  • Wrap the bands around the pole and use a power driver with a straight blade screw-driver, or a 3/8" socket fitting, to tighten the bands securely around the pole (F). F

Renseignements généraux

Nom : Mier BW-24PM6 Pole Mount Kit For 24" Wide Metal Box On A 6" Pole , Mier Products
Catégorie : Mounting Kits & Hardware
UPC Code : 999999484671
Country of Origin : United States. Country of origin is subject to change.

Spécifications

Caractéristiques générales

ADI Numéro du produit : BW-24PM6
Code fabricant : BW-24PM6
Fabricant : Mier Products, Inc
Marque : Mier
Nom de produit : Pole Mount
Type de produit : Pole Mount

Caractéristiques techniques

Compatible avec : Enclosure

Caractéristiques physiques

Application/Utilisation : Pole

Divers

Caractéristiques : Heavy Duty
Pays d'origine : United States
close button