Ademco's manual fire alarm stations are designed to be non-code single action devices for use in UL listed fire-alarm applications. The attractive die-cast aluminum-alloy housing meets ADA pull requirements and has been tested at Underwriter's Laboratory. For ADA compliance, manual stations must be mounted less than 48o above the floor for front wheelchair access and less than 54o above the floor for side wheelchair access.
A key reset feature on the 5140MPS-1 is designed for positive authorized resetting action. The key is designed to operate and match Ademco controls. The 5140MPS-1 utilizes a terminal block for secure terminations. The 5140MPS-2 is furnished with an Allen hex fitting and is equipped with wire leads. Two alarm deterrant break tubes are supplied with each manual station; one tube is visible from the front and the spare is stored in a compartment within the unit.
Spécifications
Caractéristiques générales
ADI Numéro du produit : 5140MPS-1
Code fabricant : 5140MPS-1
Fabricant : Resideo
Marque : Honeywell Home
Modèle de produit : 5140MPS-1
Nom de produit : 5140MPS-1 Pull Station
Type de produit : Pull Station
Caractéristiques techniques
Type d'Avertisseur d'Incendie : Single Action
Caractéristiques de l'alimentation
Tension d'entrée : 120 V AC
Caractéristiques physiques
Application/Utilisation : Fire Alarm
Couleur du produit : Red, White
Hauteur : 4.75" (120.65 mm)
Hauteur (mm) : 120.65
Largeur : 3.12" (79.25 mm)
Largeur (mm) : 79.248
Matériau : Cast Aluminum
Profondeur : 2" (50.80 mm)
Profondeur (mm) : 50.8
Garantie
Garantie Limitée : 2 Year
Informations produit
Imprimé/Message : Fire, Pull
Divers
Caractéristiques : Key Lock
Contenu de l'emballage : <ul><li>5140MPS-1 Pull Station</li><li>Key Rest Test</li><li>Terminal Block</li></ul>
Informations complémentaires : <ul><li>Gold contact SPST</li><li>Key reset and test</li><li>Screw terminals</li></ul>
