General

The FireLite MPS Addressable Series manual stations provide reporting for FireLite's ULC-listed fire alarm control panels. These high quality, die cast metal manual stations include screw terminal connections, and integrated break-glass rod. The alarm contact for the manual station is rated for 1A, 24VDC. The contacts are gold plated to avoid the risk of corrosion.

The MPS Series manual stations are available as single or twostage for addressable systems. Models FI-MPS-SA/SAC are single-stage manual stations. Models FI-MPS-2AC/2A (twostage models) are similar to the FI-MPS-SC (single-stage models) except they contain an additional 2nd Stage normally open key-switch. A 2nd stage key is supplied with each unit to activate the 2nd Stage key-switch.

All models are available with screw terminal connectors and a hex key for reset. Two-stage models also include a key-switch and 2 keys. All addressable models require an additional trim plate (sold separately) to mount on a 4" electrical box (RMSTP3) or a 2 gang electrical box (RMS-TP1) with a minimum depth of 5.5cm (2.125"). All addressable models can mount to a single gang electrical box for retrofit situations when used with an extension ring (MPS-ER, sold separately).

For surface mounting, use FireLite surface back-box with all addressable manual stations.

Operation

The FireLite MPS Series manual stations are operated by pulling the handle on the front of the station. To reset the manual station, open the manual station with the hex key (provided) and place the handle in the normal upright position. Replace the break-glass rod, and close the manual station front cover.

The FI-MPS two-stage models include a key switch which is located above the handle. Operation of the key-switch, when connected to a separate alarm initiating circuit, will activate the second stage of a two-stage alarm signaling system.

The FI-MPS two-stage models include a key switch which is located above the handle. Operation of the key-switch, when connected to a separate alarm initiating circuit, will activate the second stage of a two-stage alarm signaling system.

Models provided with an ancillary contact for mag-lock release, will simultaneously release the locally connected mag-lock upon pulling the handle on the front of the manual station.

Features

• Constructed of high quality die-cast metal
• Highly visible red enamel finish
• English and French lettering
• Single action pull lever design
• Optional dual action lever kit
• Integrated break-glass
• Hex key resettable
• Screw terminal connectors
• Optional ancillary contact for local mag-lock release
• Single-stage and two-stage models
• Key-switch activation for second stage
• Fully addressable using LiteSpeed® or CLIP technology
• Single-stage addressable manual stations require one address on a data communications link (DCL) circuit
• Two-stage addressable manual stations require two addresses on a data communications link (DCL) circuit
• Surface or semi-flush mounting
• All addressable models mount on a standard 4" square electrical box or a two-gang electrical box with suitable semi-flush mounting plate (sold separately)
• All addressable models can mount to a single-gang electrical box for retrofit situations when used with an extension ring (MPS-TR, sold separately)