Aperçu
AL600ACM220 converts a nominal 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
Renseignements généraux
Nom : Altronix AL600ACM220 Access Power Controller with Power Supply Charger, 8 Fused Relay Outputs, 12/24VDC at 6A, FAI, 220VAC, BC400 Enclosure , Altronix
Catégorie : Access Power Controllers
UPC Code : 782239950423
Country of Origin : United States. Country of origin is subject to change.
Spécifications
Caractéristiques générales
ADI Numéro du produit : AX-600ACM220
Code fabricant : AL600ACM220
Fabricant : Altronix Corporation
Marque : Altronix
Modèle de produit : AL600ACM220
Nom de produit : 8 Fused Outputs Power Supply/Access Power Controller. 12/24VDC @ 6A.
Poids (approximatif) (g) : 8187.342
Type de produit : Proprietary Power Supply
General Information
NDAA Compliant : Yes
Caractéristiques techniques
Tension de sortie : 12 V DC @ 6 A, 24 V DC @ 6 A
Caractéristiques de l'alimentation
Courant d'entrée : 1.2 A @ 220V
Plage de tension d'entrée : 198 V AC - 256 V AC
Tension d'entrée : 220 V AC
Tension d'entrée (V AC) : 220
Caractéristiques physiques
Facteur de forme : Wall Mount
Hauteur : 15.50" (393.70 mm)
Hauteur (mm) : 393.7
Largeur : 12.25" (311.15 mm)
Largeur (mm) : 311.15
Poids (approximatif) : 8.19 kg
Profondeur : 4.50" (114.30 mm)
Profondeur (mm) : 114.3
Commandes/Indicateurs
Indicateurs de statut : <ul><li>Red LEDs indicate outputs are triggered (relays energized)</li><li>Green LED indicates FACP disconnect is triggered</li><li>AC input and DC output LED indicators</li></ul>
Garantie
Garantie Limitée : Lifetime
Informations produit
Type de protection : Short Circuit, Thermal Overload
Divers
Certification environnementale : RoHS
Certifications et normes : CE
Respectueux de l'environnement : Yes
