Long-Range, Secure Transmission
The ioProx Transmitter is ideal for long-range (up to 45 m/150 ft) applications such as opening parking gates. The (2- or 4-button) transmitter is available with an optional integrated ioProx tag, which can be read by an ioProx card reader, making it an ideal solution to access both a parking facility and an office building without searching for multiple access cards. The ioProx transmitter uses radio-frequency (RF) technology secured with encrypted coding. The ioProx Receiver is field selectable for either 26-bit Wiegand format or for Kantech Extended Secure Format (XSF).
Easy Configuration
The receiver is field-configurable so that dip switches can be set to determine which corresponding button on the transmitter will activate the receiver. The same wireless transmitter can be used to operate up to four different receivers (one per button) located within close proximity to each other. If the receivers that are allocated to each button are out of range of the wireless transmitters, additional receivers can be configured and used with the same 4-button transmitter.
Easy Installation
The ioProx receiver can be installed using unshielded cable up to 150 m (500 ft) from the controller. Using this type of cable significantly reduces installation cost.
ioProx Wireless Transmitters
The ioProx wireless transmitters are available in a 2- or 4-button version. With an extra long 433.92 MHz read range, it is an ideal solution for parking lots, garages, or anywhere there is a significant distance between a cardholder and the secured entrance.
Encrypted Code for Higher Security
ID credentials consisting of a site and ID number are encoded on the wireless transmitter. When the appropriate button on the transmitter is pressed, the data is sent to the receiver using incremental packet transmission. This creates a unique code transmission every time the button is pressed so that no one can intercept the code and use it to circumvent the access control system.
Model Available with Integrated ioProx Tag
The ioProx wireless transmitters include a model with an integrated ioProx tag for use with any ioProx card reader. Therefore, if you install the ioProx reader in a parking garage and an ioProx card reader at the building entrance, users can gain access to both using the same transmitter rather than searching for a different key tag or card for each entrance.
